Needle Valve
Superwell needle valve is a new type of pressure reducing valve. It is made of stainless steel. It has small volume, large capacity of decompression chamber, stable excitation speed and low failure rate.
The Airgun regulator with simple installation without adjustments on rifle, so everything can be returned back. All you need to do is unscrew the valve body from bottle (before screwing launch air). You need suitable stick and vise. Then screw regulator between the bottle and valve. Regulator with vented to atmosphere.
Product Details
The position of the manometer and quick fill pin can be selected before pressurizing. To fulfill the need to purchase painball coupling , which is the same as marauder or other rifle. After installing the regulator NEVER fill the old way, through the valve. At fill always open the valve bottle slowly and do not fill too quickly. After installing the regulator NEVER fill throught by valve on the airgun, only by quick fill on regulator. For the filling you must purchase paintball coupling, which is the same as gun marauder or more.
Years ago, we produced a new valve product for air guns. When we were asked by users to provide more efficient, easier to maintain and more cost-effective solutions, we launched Needle regulator.
Stable performance
Like all pressure reducing valves, the main body is made of stainless steel,which contains a pressure relief mechanism inside and uses the most reasonable disc spring combination mode through scientific calculation. The inside of the main body is ground, the decompression system will not fail after 10,000 times of use.
When we decided to be part of the airgun industry, we also made the decision to ensure that players had the precise and stable valves they needed to enter the game.
Large capacity pressure storage space
The superwell needle valve is equipped with a 34cc pressure memory, which is connected with the base through thread. The large capacity memory effectively increases the muzzle energy and the stability of the excitation.
Alloy steel needle
The valve needle of superwell needle valve is made of high hardness die steel. It is ground, the valve needle will not deform and bend after tens of thousands of uses. The Huben team always consider for users. We offer a small gas cylinder for quick inspection of pressure regulation, which is convenient for you when you need to adjust the pressure.
Warning
You must keep maximum cleanness in the entire pressure system (airtube and outer o-rings). Do not disassemble the regulator without previous approval, which will be awarded based on e-mail correspondence, where you provide the reason why it would be necessary to disassemble the regulator. In the case of breach this procedure you may damage the regulator function (fully assembled regulator is not simple and it is necessary to follow the correct procedure). For these reasons, the disassembly without previous consent,or failure exact installation procedure can not claim the warranty. Since regulator is not original part from the manufacturer’s, installation is on your own responsibility.
Shipment Contains
- Regulator
- 1 piece Inner hexagon spanner
- 1 piece spring
- 4 pieces 11×1.5 o-rings
- 14 pieces 6×1.5 o-rings
- 2 pieces 22×2.5 o-rings
- 4 pieces 18×2 o-rings
- 10 pieces 18×1.5 o-rings
- 4 pieces 20×1.9 o-rings
